MagnaFlow Direct Fit Catalytic Converter 05-07 Subaru Outback 3.0L
MagnaFlow Direct Fit Catalytic Converter 05-07 Subaru Outback 3.0L
A$2,038.41
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 51603. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51603 includes (1) Flange Gasket, (2) Bolts, (2) Nuts and interchanges with OE parts 44620AA08A, 44620AA36A, 44620AB57A, 44620AB92A, 44620AC40A. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Overview
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51603. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.
Designed to fit the 2006-2007 Subaru B9 Tribeca, 2005-2009 Subaru Outback, and more, this direct-fit catalytic converter also interchanges with OE parts 44620AA08A and 44620AA36A, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Features and Benefits
- Meets EPA Requirements
Product Details
| Air Tube Adaptable: | No |
|---|---|
| Air Tube Count: | 0 |
| Anticipated Ship Out Time: | Approximately 1-2 Days |
| Body Length (in.): | 12 |
| Body Length: | 12.000 in. |
| Body Material: | Stainless Steel |
| Body Type: | Spun |
| Body Width (in.): | 6 |
| Body Width: | 6.000 in. |
| CARB Compliant: | No |
| CAT Converter Air Tube Adapter: | Not Air Tube Kit Adaptable |
| CAT Converter Configuration: | Direct-Fit |
| California Air Resources Board (CARB) Certified: | No |
| California Proposition 65: | WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov |
| Catalytic Converter Air Tube Adapter: | Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material: | Stainless |
| Catalytic Converter Configuration: | Direct-Fit |
| Catalytic Converter Format: | Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Inlet Diameter: | 2.25 |
| Catalytic Converter Length: | 12 |
| Catalytic Converter Outlet Diameter: | 2.25 |
| Catalytic Converter Overall Length: | 50 |
| Catalytic Converter Oxygen Sensor Location: | Pre and Post Converter |
| Catalytic Converter Substrate Material: | Ceramic |
| Catalytic Converter Width: | 6 |
| Clamp Included: | No |
| Clamps Included: | No |
| Components: | Bolt=2 |
| Converter Body Length: | 11.25 |
| Converter Body Material: | Stainless Steel |
| Converter Body Size: | OEM |
| Converter Quantity: | 1 |
| Converter Tube Material: | Stainless Steel |
| Core Substrate Material: | Ceramic |
| Description: | Conv DF 05-07 Subaru Outback 3.0L |
| Emission: | Non-California (49-State) |
| Exhaust Component Mount Type: | Uses Factory Hangers |
| Exhaust Pipe Material: | Stainless Steel |
| Finish: | Stainless Steel |
| Grade Type: | Regular |
| Heat Shield Attached: | No |
| Heat Shield Material: | None |
| Inlet Attachment Type: | Bolt-On |
| Inlet Attachment: | Bolt-On |
| Inlet Diameter: | 2.250 in. |
| Inlet Gasket Included: | No |
| Inlet Inside Diameter (in.): | 2.25 |
| Inlet Inside Diameter: | 2.250 in. |
| Inlet Mounting Hardware Included: | No |
| Inlet Size (in.): | 2.25 |
| Inlet Type: | Flanged |
| Main Piping Diameter (in.): | Stainless Steel |
| Main Piping Diameter: | 2.250 in. |
| Material: | Stainless Steel |
| Mounting Hardware Included: | Yes |
| Outlet Diameter: | 2.500 in. |
| Outlet Gasket Included: | Yes |
| Outlet Mounting Hardware Included: | Yes |
| Outlet Outside Diameter (in.): | 2.25 |
| Outlet Outside Diameter: | 2.250 in. |
| Outlet Quantity: | 1 |
| Outlet Size (in.): | 2.25 |
| Outlet Type: | Flanged |
| Overall Length (in.): | 50 |
| Overall Length: | 50 |
| Oxygen Sensor Location: | Pre and Post Converter |
| Part Number: | mag51603 |
| Recommended Use: | Converter |
| Sensor Port Count: | 2 |
| Series: | OEM Grade |
| Substrate Material: | Ceramic |
| Subtitle: | Federal / EPA Compliant |
| Subtitles: | Federal / EPA Compliant |
| Title: | OEM Grade Manifold |
| Type: | One-Piece |
| WARNING CA Proposition 65: | No |
| Warranty: | 5 year/50,000 mile External, 2 years/25,000 miles Internal |
Part Type
Catalytic Converter with Integrated Exhaust Manifold
Features
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Meets EPA Requirements
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Specifications
- Product Attributes - Brand
- MagnaFlow
- Product Attributes - Manufacturer's Part Number
- 51603
- Product Attributes - Part Type
- Catalytic Converters
- Product Attributes - Product Line
- MagnaFlow Direct-Fit Catalytic Converters
- Product Attributes - UPC
- 841380094704
- Product Attributes - Inlet Diameter (in.)
- 2.25 in.
- Product Attributes - Converter Case Material
- Stainless steel
- Product Attributes - Converter Substrate Material
- Ceramic honeycomb
- Product Attributes - Converter Overall Length (in.)
- 50.00
- Product Attributes - Converter Style
- 3-way
- Product Attributes - Remanufactured
- No
- Product Attributes - AIR Tube
- No
- Product Attributes - Heat Shield
- No
- Product Attributes - Quantity
- Sold individually.
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag51603 |
| SFX Item ID | 4288539 |
| Supplier Item Code | 4288539 |
| Manufacturer SKU | 51603 |
| Manufacturer UPC | 841380094704 |
| Alternative References | mpe-51603, MFL51603, 3.0L |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Magnaflow
