MagnaFlow DF Cat. Conv 09-10 Chevy Aveo/Aveo5 1.6L Manifold / 09 Pontiac G3 1.6L Manifold (49 State)
MagnaFlow DF Cat. Conv 09-10 Chevy Aveo/Aveo5 1.6L Manifold / 09 Pontiac G3 1.6L Manifold (49 State)
A$1,336.91
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
IMPORTANT NOTICE: Note for Australian and European MarketsUnless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, linkages, instrument clusters, panhard rods/traction bars, drag links, brake boosters, brake or clutch lines, accelerator cables, heater cores, some master cylinders and adjacent parts can vary between LHD and RHD configurations. In some models compenents such as windscreen wiper arms, motors and linkages could differ in their size and orientation. Items such as floor mats & dash mats may have differences in their structure around the front row (or padding in different locations). In many cases items are identical depending on the design of the vehicle and part, but may have differing mounts, lengths or bolt patterns. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.(keyword: manifold)Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.Reference Information Reference Data (Provide these details to our support team) Brand Name/s Magnaflow, MagnaFlow Exhaust Products, MAGNAFLOW PERF EXHAUST, Magnaflow Performance StreetFX SKU mag51062 SFX Item ID 4286570 Accounting SKU mag-51062 Manufacturer SKU 51062 Manufacturer UPC 841380068958 Alternative References 51062, MFL51062, MPE-51062
OEM Grade
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 51062. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51062 includes (3) Bolts, (3) Nuts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Information
Magnaflow OEM Grade Manifold Catalytic Converter
Part Type
Catalytic Converter with Integrated Exhaust Manifold
Features and Benefits
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Product Details
| 10982: | Stainless Steel |
| Air Tube Adaptable: | No |
| Air Tube Count: | 0 |
| Anticipated Ship Out Time: | Approximately 1-2 Days |
| Body Length: | 7.625 in. |
| Body Material: | Stainless Steel |
| Body Type: | Spun |
| Body Width: | 5.000 in. |
| CARB Compliant: | No |
| CARB Executive Order Number: | Not Applicable |
| Catalytic Converter Air Tube Adapter: | Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material: | Stainless |
| Catalytic Converter Configuration: | Direct-Fit |
| Catalytic Converter Format: | Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Inlet Diameter: | 2.375 |
| Catalytic Converter Length: | 7.625 |
| Catalytic Converter Outlet Diameter: | 2 |
| Catalytic Converter Overall Length: | 17.375 |
| Catalytic Converter Oxygen Sensor Location: | Pre Converter |
| Catalytic Converter Substrate Material: | Ceramic |
| Catalytic Converter Width: | 5 |
| Clamp Included: | No |
| Clamps Included: | No |
| Components: | Bolt=3 |
| Converter Body Length: | 5.25 |
| Converter Body Material: | Stainless Steel |
| Converter Body Size: | OEM |
| Converter Quantity: | 1 |
| Converter Tube Material: | Stainless Steel |
| Core Substrate Material: | Ceramic |
| Description: | OEM Grade Manifold Catalytic Converter |
| Exhaust Component Mount Type: | Uses Factory Hangers |
| Exhaust Inlet Connection Type: | Bolt-On |
| Exhaust Outlet Connection Type: | Bolt-On |
| Exhaust Pipe Material: | Stainless Steel |
| Finish: | Stainless Steel |
| Grade Type: | Regular |
| Heat Shield Attached: | No |
| Heat Shield Material: | None |
| Inlet Attachment Type: | Bolt-On |
| Inlet Attachment: | Bolt-On |
| Inlet Connection Type: | Bolt-On |
| Inlet Diameter: | 2.375 in. |
| Inlet Gasket Included: | No |
| Inlet Inside Diameter: | 2.375 in. |
| Inlet Mounting Hardware Included: | No |
| Inlet Type: | Flanged |
| Main Piping Diameter: | 2.000 in. |
| Material: | Stainless Steel |
| Mounting Hardware Included: | Yes |
| Outlet Attachment Type: | Bolt-On |
| Outlet Attachment: | Bolt-On |
| Outlet Connection Type: | Bolt-On |
| Outlet Diameter: | 2.000 in. |
| Outlet Gasket Included: | No |
| Outlet Mounting Hardware Included: | Yes |
| Outlet Outside Diameter: | 2.000 in. |
| Outlet Quantity: | 1 |
| Outlet Type: | Flanged |
| Overall Length: | 17.375 in. |
| Oxygen Sensor Location: | Pre Converter |
| Part Number: | mag51062 |
| Recommended Use: | Converter |
| Sensor Port Count: | 1 |
| Series: | OEM Grade |
| Substrate Material: | Ceramic |
| Type: | One-Piece |
Product Overview
MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.
All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.
• Stainless steel construction
• Formulated for Gas and Diesel Applications
| Additional Application Notes | |
|---|---|
| • OEM Grade Series; 2 in. Tubing; 2.375 in. Inlet/2 in. Outlet; Overall L-17.375 in.; O2 Sensor Loc Pre Conv.; Not Air Tube Kit Adapt.;Not Legal For Sale Or Use On Vehicles Registered In CA | |
| • OEM Grade Series; 2 in. Tubing; 2.375 in. Inlet/2 in. Outlet; Overall L-17.375 in.; O2 Sensor Loc Pre Conv.; Not Air Tube Kit Adapt.;Not Legal For Sale Or Installation In CA/CO/NY | |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Data: v2 - Desc: v4.2 - Upd: 2026-10-13 19:10:17
Product Overview
MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.
All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.
* Stainless steel construction
* Formulated for Gas and Diesel Applications
Features and Benefits
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel Mig Welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Product Details
| 10982: | Stainless Steel |
|---|---|
| Air Tube Adaptable: | No |
| Air Tube Count: | 0 |
| Anticipated Ship Out Time: | Approximately 1-2 Days |
| Body Length: | 7.625 in. |
| Body Material: | Stainless Steel |
| Body Type: | Spun |
| Body Width: | 5.000 in. |
| CARB Compliant: | No |
| CARB Executive Order Number: | Not Applicable |
| California Air Resources Board (CARB) Certified: | No |
| Catalytic Converter Air Tube Adapter: | Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material: | Stainless |
| Catalytic Converter Configuration: | Direct-Fit |
| Catalytic Converter Format: | Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Inlet Diameter: | 2.375 |
| Catalytic Converter Length: | 7.625 |
| Catalytic Converter Outlet Diameter: | 2 |
| Catalytic Converter Overall Length: | 17.375 |
| Catalytic Converter Oxygen Sensor Location: | Pre Converter |
| Catalytic Converter Substrate Material: | Ceramic |
| Catalytic Converter Width: | 5 |
| Clamp Included: | No |
| Clamps Included: | No |
| Components: | Bolt=3 |
| Converter Body Length: | 5.25 |
| Converter Body Material: | Stainless Steel |
| Converter Body Size: | OEM |
| Converter Quantity: | 1 |
| Converter Tube Material: | Stainless Steel |
| Core Substrate Material: | Ceramic |
| Description: | OEM Grade Manifold Catalytic Converter |
| Emission: | Non-California (49-State) |
| Exhaust Component Mount Type: | Uses Factory Hangers |
| Exhaust Inlet Connection Type: | Bolt-On |
| Exhaust Outlet Connection Type: | Bolt-On |
| Exhaust Pipe Material: | Stainless Steel |
| Finish: | Stainless Steel |
| Grade Type: | Regular |
| Heat Shield Attached: | No |
| Heat Shield Material: | None |
| Inlet Attachment Type: | Bolt-On |
| Inlet Attachment: | Bolt-On |
| Inlet Connection Type: | Bolt-On |
| Inlet Diameter: | 2.375 in. |
| Inlet Gasket Included: | No |
| Inlet Inside Diameter: | 2.375 in. |
| Inlet Mounting Hardware Included: | No |
| Inlet Type: | Flanged |
| Main Piping Diameter: | 2.000 in. |
| Material: | Stainless Steel |
| Mounting Hardware Included: | Yes |
| Outlet Attachment Type: | Bolt-On |
| Outlet Attachment: | Bolt-On |
| Outlet Connection Type: | Bolt-On |
| Outlet Diameter: | 2.000 in. |
| Outlet Gasket Included: | No |
| Outlet Mounting Hardware Included: | Yes |
| Outlet Outside Diameter: | 2.000 in. |
| Outlet Quantity: | 1 |
| Outlet Type: | Flanged |
| Overall Length: | 17.375 in. |
| Oxygen Sensor Location: | Pre Converter |
| Part Number: | mag51062 |
| Prop 65 Y/N: | No |
| Recommended Use: | Converter |
| Sensor Port Count: | 1 |
| Series: | OEM Grade |
| Substrate Material: | Ceramic |
| Subtitle: | Federal / EPA Compliant Manifold Catalytic Converter |
| Subtitles: | Federal / EPA Compliant |
| Title: | MagnaFlow OEM Grade Federal / EPA Compliant Manifold Catalytic Converter 51062 |
| Type: | One-Piece |
| WARNING CA Proposition 65: | No |
Part Type
Catalytic Converter with Integrated Exhaust Manifold
Features
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Specifications
Catalytic Converter, Stainless Steel, Chevy, Pontiac, 1.6L, Front, Each
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
| Product Attributes | |
|---|---|
| Brand | MagnaFlow |
| Manufacturer's Part Number | 51062 |
| Part Type | Catalytic Converters |
| Product Line | MagnaFlow Direct-Fit Catalytic Converters |
| UPC | 841380068958 |
| Inlet Diameter (in.) | 2.38 in. |
| Converter Case Material | Stainless steel |
| Converter Substrate Material | Ceramic honeycomb |
| Converter Overall Length (in.) | 17.38 |
| Converter Style | 3-way |
| Remanufactured | No |
| AIR Tube | No |
| Heat Shield | No |
| Quantity | Sold individually. |
| Manufacturer Attributes | |
|---|---|
| Sensor Port Count | 1 |
| Overall Length | 12.5 |
| Converter Body Length | 5.25 |
| Substrate Material | Ceramic |
| Inlet Type | Flanged |
| Outlet Type | Flanged |
| Clamps Included | No |
| Heat Shield Attached | No |
| Inlet Gasket Included | No |
| Inlet Mounting Hardware Included | No |
| Outlet Gasket Included | No |
| Type | One-Piece |
| Grade Type | Regular |
| Converter Tube Material | Stainless Steel |
| Converter Body Material | Stainless Steel |
| Outlet Mounting Hardware Included | Yes |
| Body Type | Spun |
| CARB Executive Order Number | Not Applicable |
| Finish | Stainless Steel |
| Series | OEM Grade |
| Title | MagnaFlow OEM Grade Federal / EPA Compliant Manifold Catalytic Converter 51062 |
| Manufacturer Designation | OEM Grade Manifold Catalytic Converter |
| Product Class | Catalytic Converter with Integrated Exhaust Manifold |
| Construction/Type | Magnaflow OEM Grade Manifold Catalytic Converter |
| Product Outline | Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency Simplifies installation with essential gaskets and hardware being included in the box Durable 308 stainless steel MIG welds |
| Vehicle Brief | Manifold Converter |
Product Details
| 10982: | Stainless Steel |
|---|---|
| Air Tube Adaptable: | No |
| Air Tube Count: | 0 |
| Anticipated Ship Out Time: | Approximately 1-2 Days |
| Body Length: | 7.625 in. |
| Body Material: | Stainless Steel |
| Body Type: | Spun |
| Body Width: | 5.000 in. |
| CARB Compliant: | No |
| CARB Executive Order Number: | Not Applicable |
| California Air Resources Board (CARB) Certified: | No |
| Catalytic Converter Air Tube Adapter: | Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material: | Stainless |
| Catalytic Converter Configuration: | Direct-Fit |
| Catalytic Converter Format: | Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Inlet Diameter: | 2.375 |
| Catalytic Converter Length: | 7.625 |
| Catalytic Converter Outlet Diameter: | 2 |
| Catalytic Converter Overall Length: | 17.375 |
| Catalytic Converter Oxygen Sensor Location: | Pre Converter |
| Catalytic Converter Substrate Material: | Ceramic |
| Catalytic Converter Width: | 5 |
| Clamp Included: | No |
| Clamps Included: | No |
| Components: | Bolt=3 |
| Converter Body Length: | 5.25 |
| Converter Body Material: | Stainless Steel |
| Converter Body Size: | OEM |
| Converter Quantity: | 1 |
| Converter Tube Material: | Stainless Steel |
| Core Substrate Material: | Ceramic |
| Description: | OEM Grade Manifold Catalytic Converter |
| Emission: | Non-California (49-State) |
| Exhaust Component Mount Type: | Uses Factory Hangers |
| Exhaust Inlet Connection Type: | Bolt-On |
| Exhaust Outlet Connection Type: | Bolt-On |
| Exhaust Pipe Material: | Stainless Steel |
| Finish: | Stainless Steel |
| Grade Type: | Regular |
| Heat Shield Attached: | No |
| Heat Shield Material: | None |
| Inlet Attachment Type: | Bolt-On |
| Inlet Attachment: | Bolt-On |
| Inlet Connection Type: | Bolt-On |
| Inlet Diameter: | 2.375 in. |
| Inlet Gasket Included: | No |
| Inlet Inside Diameter: | 2.375 in. |
| Inlet Mounting Hardware Included: | No |
| Inlet Type: | Flanged |
| Main Piping Diameter: | 2.000 in. |
| Material: | Stainless Steel |
| Mounting Hardware Included: | Yes |
| Outlet Attachment Type: | Bolt-On |
| Outlet Attachment: | Bolt-On |
| Outlet Connection Type: | Bolt-On |
| Outlet Diameter: | 2.000 in. |
| Outlet Gasket Included: | No |
| Outlet Mounting Hardware Included: | Yes |
| Outlet Outside Diameter: | 2.000 in. |
| Outlet Quantity: | 1 |
| Outlet Type: | Flanged |
| Overall Length: | 17.375 in. |
| Oxygen Sensor Location: | Pre Converter |
| Part Number: | mag51062 |
| Prop 65 Y/N: | No |
| Recommended Use: | Converter |
| Sensor Port Count: | 1 |
| Series: | OEM Grade |
| Substrate Material: | Ceramic |
| Subtitle: | Federal / EPA Compliant Manifold Catalytic Converter |
| Subtitles: | Federal / EPA Compliant |
| Title: | MagnaFlow OEM Grade Federal / EPA Compliant Manifold Catalytic Converter 51062 |
| Type: | One-Piece |
| WARNING CA Proposition 65: | No |
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag51062 |
| SFX Item ID | 4286570 |
| Supplier Item Code | 4286570 |
| Manufacturer SKU | 51062 |
| Manufacturer UPC | 841380068958 |
| Alternative References | mpe-51062, MFL51062, Aveo/Aveo5, 1.6L |
Brochures
Compatibility
| MagnaFlow DF Cat. Conv 09-10 Chevy Aveo/Aveo5 1.6L Manifold / 09 Pontiac G3 1.6L Manifold (49 State) | ||||
|---|---|---|---|---|
| Year Range | Make | Model | Submodels | Region |
| 2009-2011 | Chevrolet | Aveo | LS, LT | US |
| 2009-2011 | Chevrolet | Aveo5 | LS, LT | US |
| 2009-2010 | Pontiac | G3 | Base | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year or regional revisions. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Detailed Compatibility
| Application Data | |
|---|---|
| Universal | No |
| Make | CHEVROLET |
| Model | AVEO5 |
| Submodel | LS |
| Beginning Year | 2009 |
| Ending Year | 2010 |
| Engine Type | L4 |
| Engine Family | GM 4-cylinder |
| Engine Size | 1.6L/98 |
| Catalytic Converter Position | Front |
| Universal | No |
| Make | CHEVROLET |
| Model | AVEO5 |
| Submodel | LS |
| Beginning Year | 2009 |
| Ending Year | 2011 |
| Engine Type | L4 |
| Liter | 1.6 |
| CID | 98 |
| CC | 1598 |
| Engine Family | GM 4-cylinder |
| Engine Size | 1.6L/98 |
| Drivetrain | FWD |
| Catalytic Converter Position | Catalytic Converter with Integrated Exhaust Manifold |
| Engine VIN Code | E |
| Universal | No |
| Make | CHEVROLET |
| Model | AVEO5 |
| Submodel | LT |
| Beginning Year | 2009 |
| Ending Year | 2010 |
| Engine Type | L4 |
| Engine Family | GM 4-cylinder |
| Engine Size | 1.6L/98 |
| Catalytic Converter Position | Front |
This may not be an exhaustive list of compatible vehicles. Please reach out to one of our representatives if you are unsure or do not see your vehicle here.
Loading compatibility information...
Keep shopping
