MagnaFlow Sys Cat-Back 67-70 Ford Mustang 3inch
MagnaFlow Sys Cat-Back 67-70 Ford Mustang 3inch
A$3,037.44
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The MagnaFlow Ford Mustang Street Series Crossmember-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 3.3L, 4.1L, 4.7L, 5.0L, 5.8L, 6.4L, 7.0L Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang's exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15819 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
Product Overview
The MagnaFlow 1967-1970 Ford Mustang Street Series Crossmember-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 3.3L, 4.1L, 4.7L, 5.0L, 5.8L, 6.4L, 7.0L 1967-1970 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang's exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15819 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
Features and Benefits
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno Proven Performance
- Dyno-proven performance
Product Details
| Anticipated Ship Out Time: | Approximately 1-2 Days |
|---|---|
| Attachment Style: | Weld-On |
| Attachment Type: | Weld-On |
| Catalytic Converter Quantity: | 0 |
| Clamp Type: | Band Clamp |
| Clamping Type: | Band Clamp |
| Clamps Included: | Yes |
| Color/Finish: | Stainless |
| Components: | Band Clamp=8 |
| Description: | Street Series Stainless Crossmember-Back System |
| Exhaust Inlet Connection Type: | Weld-On |
| Exhaust Pipe Material: | Stainless |
| Exhaust Tip Quantity: | 0 |
| Exhaust Type: | Dual |
| Exit Location: | Dual Split Rear |
| Exit Position: | Dual Split Rear |
| Exit Quantity: | Dual |
| Exit Style: | Dual Split Rear |
| Finish: | Stainless |
| Gasket Included: | No |
| Gasket Or Seal Included: | No |
| Hangers Included: | Yes |
| Inlet Connection Type: | Weld-On |
| Inlet Inside Diameter: | 3.000 in. |
| Inlet Type: | Weld-On |
| Main Piping Diameter: | 3.000 in. |
| Material: | Stainless |
| Mounting Bracket Included: | No |
| Muffler Body Diameter: | 4.000 in. x 9.000 in. |
| Muffler Body Finish: | Polished |
| Muffler Body Height: | 4.000 in. |
| Muffler Body Length: | 14.000 in. |
| Muffler Body Material: | Stainless Steel |
| Muffler Body Shape: | Oval |
| Muffler Body Width: | 9.000 in. |
| Muffler Count: | 2 |
| Muffler Finish: | Brushed |
| Muffler Material: | Stainless Steel |
| Muffler Quantity: | 2 |
| Muffler Type: | Straight-Through |
| Outlet Outside Diameter: | 3.000 in. |
| Part Number: | mag15819 |
| Pipe Material: | Stainless Steel |
| Prop 65 Y/N: | No |
| Recommended Use: | Performance |
| Series: | Street |
| Sound Level: | Moderate |
| Subtitle: | Crossmember-Back Performance Exhaust System |
| Subtitles: | Crossmember-Back |
| System Type: | Crossmember Back |
| Tail Pipe Diameter: | 3.000 in. |
| Tip Diameter: | N/A |
| Tip Quantity: | 0 |
| Title: | MagnaFlow 1967-1970 Ford Mustang Street Series Crossmember-Back Performance Exhaust System |
| Tubing Diameter: | 3.000 in. |
| Type: | Crossmember-Back |
| Valve Included: | No |
| Valve Type: | None |
| WARNING CA Proposition 65: | No |
| Warranty: | Lifetime |
Part Type
Exhaust System Kit
Features
- CNC Precision Robotic Manufacturing Techniques
- Durable Corrosion-Resistant Stainless Steel Construction
- Dyno Proven Performance
- Dyno-proven performance
Specifications
- Product Attributes - Brand
- MagnaFlow
- Product Attributes - Manufacturer's Part Number
- 15819
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Product Line
- MagnaFlow Street Series Performance Exhaust Systems
- Product Attributes - UPC
- 841380013538
- Product Attributes - System Material
- 409 stainless steel
- Product Attributes - System Style
- Crossmember back
- Product Attributes - Exhaust Type
- Dual
- Product Attributes - Exit Location
- Split rear
- Product Attributes - System Finish
- Natural
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 3.00 in.
- Product Attributes - Muffler Included
- Yes
- Product Attributes - Muffler Quantity
- Two
- Product Attributes - Muffler Configuration
- Single inlet/Single outlet
- Product Attributes - Muffler Style
- Perforated tube with packing
- Product Attributes - Muffler Material
- 409 stainless steel
- Product Attributes - Muffler Finish
- Polished
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Tailpipe Diameter (in.)
- 3.00 in.
- Product Attributes - Tip Included
- No
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Notes
- Depending on vehicle configuration, some modifications may be required. See installation instructions for details, if applicable. Kit is designed for use with original exhaust manifolds of tubular headers. Some welding required for installation. Kit includes polished mufflers and Tru-X pipe.
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag15819 |
| SFX Item ID | 4284712 |
| Supplier Item Code | 4284712 |
| Manufacturer SKU | 15819 |
| Manufacturer UPC | 841380013538 |
| Alternative References | mpe-15819, MFL15819, 3inch |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
