K&N 00-04 Honda S2000 2.2L/2.0L-L4 Performance Intake Kit
K&N 00-04 Honda S2000 2.2L/2.0L-L4 Performance Intake Kit
Sale ends in Calculating...
A$583.46
A$767.91
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Overview
K&N Fuel Injection Performance Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain†robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.
FEATURES
* Guaranteed to Provide more HP and Increased Acceleration
* Engineered to Specific Vehicle Design
* Easy to Install, Usually in 90 minutes or less!
* Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
* Million Mile Limited Warranty
* Replaces OEM Filter and Air Box
* Air Filter is Washable and Reusable
* Works with Original Equipment Manufacturer Computer Systems
* Designed to use Factory Holes & Mounting Points Whenever Possible
* Most are CARB Exempt and street legal in all 50 US States
Features and Benefits
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty
Product Details
| Year | Make |
|---|---|
| Air Box Included: | No |
| Air Filter Color: | Red |
| Air Filter Element Washable: | Yes |
| Air Filter Height: | 6.5 in (165 mm) |
| Air Filter Large End Diameter: | 5.375 in (137 mm) |
| Air Filter Material: | Cotton Gauze |
| Air Filter Oulet Length: | 4.000 in. (102mm) |
| Air Filter Oulet Width: | 4.000 in. (102mm) |
| Air Filter Outlet Length: | 4.000 in. (102mm) |
| Air Filter Outlet Shape: | Round |
| Air Filter Outlet Width: | 4.000 in. (102mm) |
| Air Filter Washable: | Yes |
| CARB EO Number: | D-269-38 |
| Clamp Color/Finish: | Natural |
| Clamp Color: | Natural |
| Clamp Material: | Stainless Steel |
| Clamp Quantity: | 7 |
| Clamp Style: | Mini |
| Clamps Included: | 7 |
| Coupler Color/Finish: | Black |
| Coupler Color: | Black |
| Couplers Included: | 2 |
| Description: | Performance Air Intake System |
| Estimated Horse Power Gain: | 9.56 HP @ 6400 RPM |
| Estimated Horsepower Gain: | 9.56 HP @ 6400 RPM |
| Estimated Torque Gain: | 8 lbft |
| Filter Color: | Red |
| Filter Material: | Cotton Gauze |
| Horse Power Increase: | 10 HP |
| Intake Pipe Color / Finish: | Black |
| Intake Pipe Color: | Black |
| Intake Pipe Material: | High-Density Polyethylene |
| Intake Pipe Ports: | All intake tube ports needed for the specified applications are included |
| Item Weight: | 10.900 lbs. (4.9 kg) |
| Mass Air Flow Sensor Adapter Included: | No |
| Mass Air Flow Sensor Included: | Mass Air Flow Sensor Adapter Included When Required |
| Mounting Hardware Included: | Yes |
| Oil Included: | Yes |
| Package Material: | Paperboard |
| Package Type: | Box |
| Part Number: | knn57-3514 |
| Product Box Height: | 12.250 in. (311mm) |
| Product Box Length: | 20.250 in. (514mm) |
| Product Box Width: | 12.250 in. (311mm) |
| Product Style: | 57 Series FIPK |
| Prop 65 (C, R or CR): | CR |
| Prop 65 - Short Label: | WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Prop 65 Warning Label: | https://www.knfilters.com/images/l/prop65.jpg |
| Prop 65 Yes/No: | Yes |
| RPM: | 6400 |
| Replacement Filter: | RP-4980 |
| Retail Packaging: | No |
| Street Legal In All US States: | Yes |
| Street Legal: | Yes |
| TUV Approved (Europe): | No |
| Title: | K&N 57-3514 Performance Air Intake System |
| Type: | Gen II |
| WARNING CA Proposition 65 Message: | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| WARNING CA Proposition 65: | Yes |
| Warranty: | No-Hassle Lifetime Limited |
| Weight: | 10.9 lb (4.9 kg) |
Part Type
Engine Cold Air Intake Performance Kit
Features
- K&N Million Mile Limited Warranty
- Will not void vehicle warranty
Specifications
- Year
- Make
- Air Box Included:
- No
- Air Filter Color:
- Red
- Air Filter Element Washable:
- Yes
- Air Filter Height:
- 6.5 in (165 mm)
- Air Filter Large End Diameter:
- 5.375 in (137 mm)
- Air Filter Material:
- Cotton Gauze
- Air Filter Oulet Length:
- 4.000 in. (102mm)
- Air Filter Oulet Width:
- 4.000 in. (102mm)
- Air Filter Outlet Length:
- 4.000 in. (102mm)
- Air Filter Outlet Shape:
- Round
- Air Filter Outlet Width:
- 4.000 in. (102mm)
- Air Filter Washable:
- Yes
- CARB EO Number:
- D-269-38
- Clamp Color/Finish:
- Natural
- Clamp Color:
- Natural
- Clamp Material:
- Stainless Steel
- Clamp Quantity:
- 7
- Clamp Style:
- Mini
- Clamps Included:
- 7
- Coupler Color/Finish:
- Black
- Coupler Color:
- Black
- Couplers Included:
- 2
- Description:
- Performance Air Intake System
- Estimated Horse Power Gain:
- 9.56 HP @ 6400 RPM
- Estimated Horsepower Gain:
- 9.56 HP @ 6400 RPM
- Estimated Torque Gain:
- 8 lbft
- Filter Color:
- Red
- Filter Material:
- Cotton Gauze
- Horse Power Increase:
- 10 HP
- Intake Pipe Color / Finish:
- Black
- Intake Pipe Color:
- Black
- Intake Pipe Material:
- High-Density Polyethylene
- Intake Pipe Ports:
- All intake tube ports needed for the specified applications are included
- Item Weight:
- 10.900 lbs. (4.9 kg)
- Mass Air Flow Sensor Adapter Included:
- No
- Mass Air Flow Sensor Included:
- Mass Air Flow Sensor Adapter Included When Required
- Mounting Hardware Included:
- Yes
- Oil Included:
- Yes
- Package Material:
- Paperboard
- Package Type:
- Box
- Part Number:
- knn57-3514
- Product Box Height:
- 12.250 in. (311mm)
- Product Box Length:
- 20.250 in. (514mm)
- Product Box Width:
- 12.250 in. (311mm)
- Product Style:
- 57 Series FIPK
- Prop 65 (C, R or CR):
- CR
- Prop 65 - Short Label:
- WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
- Prop 65 Warning Label:
- https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 Yes/No:
- Yes
- RPM:
- 6400
- Replacement Filter:
- RP-4980
- Retail Packaging:
- No
- Street Legal In All US States:
- Yes
- Street Legal:
- Yes
- TUV Approved (Europe):
- No
- Title:
- K&N 57-3514 Performance Air Intake System
- Type:
- Gen II
- WARNING CA Proposition 65 Message:
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- WARNING CA Proposition 65:
- Yes
- Warranty:
- No-Hassle Lifetime Limited
- Weight:
- 10.9 lb (4.9 kg)
Reference Information
| Brand Name/s | K&n Engineering |
|---|---|
| StreetFX SKU | knn57-3514 |
| SFX Item ID | 5354849 |
| Supplier Item Code | 5354849 |
| Manufacturer SKU | 57-3514 |
| Manufacturer UPC | 24844094841 |
| Alternative References | KAN57-3514, KNE57-3514, S2000, 2.2L/2.0L-L4 |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from K&n Engineering
K&N ENGINEERING
K&N 2024 Ford Ranger Raptor V6 3.0L NextGen Cold Air Intake
knn50-2628
A$871.17
A$976.69
K&N ENGINEERING
K&N 10-22 Nissan Patrol Y62 V8 5.6LPerformance Air Intake System
knn57S-7070
A$876.79
A$1,011.03
K&N ENGINEERING
K&N 14-15 Jeep Grand Cherokee 3.0L V6 Turbo Diesel Performance Intake Kit
knn57-1570
A$750.24
A$950.19
K&N ENGINEERING
K&N 11-19 Ford Ranger 3.2L L5 Diesel Performance Air Intake System
knn57S-4001
A$924.69
A$973.04
K&N ENGINEERING
K&N 21-23 Ford Bronco 2.3L L4 / Ford Bronco Sport 1.5L L3 Spin-On Oil Filter
knnSO-1002
A$53.71
A$89.17