| Application Data | | Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 6.6L/400 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | FIRENZA |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.3L/262 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | FIRENZA |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.3L/265 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | FIRENZA |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.4L/267 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.6L/283 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | BASE |
|---|
| Beginning Year | 1978 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.9L/302 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | BASE |
|---|
| Beginning Year | 1978 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.0L/305 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1978 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.0L/307 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1978 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.3L/327 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1978 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.4L/327 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1978 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.7L/350 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | PONTIAC |
|---|
| Model | SUNBIRD |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 6.6L/400 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.4L/327 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1978 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.7L/350 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | GT |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1978 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 6.6L/400 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1978 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.3L/262 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.3L/265 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.4L/267 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.6L/283 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 4.9L/302 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.0L/305 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.0L/307 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.3L/327 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.4L/327 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
| Make | OLDSMOBILE |
|---|
| Model | STARFIRE |
|---|
| Submodel | SX |
|---|
| Beginning Year | 1977 |
|---|
| Ending Year | 1977 |
|---|
| Engine Type | V8 |
|---|
| Engine Family | Chevy small block Gen I |
|---|
| Engine Size | 5.7L/350 |
|---|
| Drivetrain | RWD |
|---|
| Power Steering | No |
|---|
| Power Brakes (application) | No |
|---|
| Air Conditioning | No |
|---|
| Standard Transmission Column Shift | No |
|---|
| Standard Transmission Floor Shift | Yes |
|---|
| Automatic Transmission Column Shift | No |
|---|
| Automatic Transmission Floor Shift | Yes |
|---|
| Footnotes | 18 - One tube each side over frame.
37 - This header cannot be installed by using the stock location side motor mounts. This header requires: 1971-74 installation kit # HOK-12601HKR, which consists of front and rear motor mounts; 1975-80 front motor mounts # HOK-12608HKR; 1975 rear mount # HOK-12632HKR for Turbo 400 installation; 1975 rear mount # HOK-12633HKR for Turbo 350, 4-speed, or aluminum Powerglide installation; and 1976-80 rear mount # HOK-12635HKR for Turbo 350, 4-speed, or aluminum Powerglide installation. All require any 1967-77 Camaro rubber transmission mount that fits your particular transmission.
38 - Installation with manual transmission requires the fabrication of a clutch cable bracket.
62 - Will fit with angle plug heads.
82 - Will not fit cast iron Powerglide. |
|---|
|
|---|
