Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock Perf RPM Cam Lifters Kit Ford 429-460
Edelbrock Perf RPM Cam Lifters Kit Ford 429-460
A$981.23
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Edelbrock part #7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with #7166 intake and #60669 cylinder heads on a 460 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications:- Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees- Lift @ Valve Intake: .556"- Lift @ Valve Exhaust: .581"- Lobe Separation: 108 Degrees- Intake Centerline: 103 Degrees- Idle Vacuum @ 1000 RPM's: 12"
Product Overview
Edelbrock part #7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with #7166 intake and #60669 cylinder heads on a 460 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .556" - Lift @ Valve Exhaust: .581" - Lobe Separation: 108 Degrees - Intake Centerline: 103 Degrees - Idle Vacuum @ 1000 RPM's: 12"
Features and Benefits
- Take the Guesswork Out of Camshaft Selection!
Product Details
| Advertised Exhaust Duration: | 300 |
|---|---|
| Advertised Intake Duration: | 290 |
| Cam Type: | Cast |
| Computer Controlled Compatible: | No |
| Description: | Performer RPM Camshaft Kit |
| Engine Make/Size: | Ford 429-460 |
| Exh. Duration @ .050 in. (Deg): | 244 |
| Exh. Duration Advertised (Deg): | 300 |
| Exhaust Duration at .050 inch Lift: | 244 |
| Exhaust Valve Lift (in.): | 0.581 |
| Exhaust Valve Lift: | 0.581 |
| Grade Type: | Performance |
| Int. Duration @ .050 in. (Deg): | 234 |
| Int. Duration Advertised (Deg): | 290 |
| Intake Duration .050 Inch Lift: | 234 |
| Intake Duration @ 0.050 in.: | 234 Degree |
| Intake Duration Advertised: | 290 |
| Intake Valve Lift (in.): | 0.556 |
| Intake Valve Lift: | 0.556 |
| Lifter Materials: | Hardened Steel |
| Lifter Type: | Hydraulic |
| Lobe Separation: | 108 |
| Part Number: | ede7167 |
| RGL: | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range: | 1000-7000 |
| Usage: | Street/Performance |
| WARNING CA Proposition 65 Message: | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| WARNING CA Proposition 65: | Yes |
Application Summary
Ford:Big-Block:429 (7.0L )/460 (7.5L)
Part Type
Engine Camshaft and Lifter Kit
Features
- Take the Guesswork Out of Camshaft Selection!
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 7167
- Product Attributes - Part Type
- Camshaft Kits
- Product Attributes - Product Line
- Edelbrock Performer RPM Cam and Lifter Kits
- Product Attributes - UPC
- 085347071678
- Product Attributes - Cam Style
- Hydraulic flat tappet
- Product Attributes - Basic Operating RPM Range
- 1,500-6,500
- Product Attributes - Camshaft Use
- Street/Strip
- Product Attributes - Intake Duration at 050 inch Lift
- 234
- Product Attributes - Exhaust Duration at 050 inch Lift
- 244
- Product Attributes - Duration at 050 inch Lift
- 234 int./244 exh.
- Product Attributes - Advertised Intake Duration
- 290
- Product Attributes - Advertised Exhaust Duration
- 300
- Product Attributes - Advertised Duration
- 290 int./300 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.556 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.581 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.556 int./0.581 exh.
- Product Attributes - Lobe Separation (degrees)
- 108
- Product Attributes - Computer-Controlled Compatible
- No
- Product Attributes - Lifters Included
- Yes
- Product Attributes - Lifter Style
- Hydraulic flat tappet
- Product Attributes - Valve Springs Included
- No
- Product Attributes - Retainers Included
- No
- Product Attributes - Locks Included
- No
- Product Attributes - Valve Stem Seals Included
- No
- Product Attributes - Timing Chain and Gears Included
- No
- Product Attributes - Assembly Lubricant Included
- Yes
- Product Attributes - Pushrods Included
- No
- Product Attributes - Rocker Arms Included
- No
- Product Attributes - Gaskets Included
- No
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Notes
- Although the advertised RPM range for these camshafts is 1,500 to 6,500 rpm, for best performance we recommend a minimum 3,000 rpm stall torque converter be used in applications with automatic transmissions.
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede7167 |
| SFX Item ID | 4236681 |
| Supplier Item Code | 4236681 |
| Manufacturer SKU | 7167 |
| Manufacturer UPC | 85347071678 |
| Alternative References | EDB7167, EDL-7167 |
Brochures
Compatibility
Ford:Big-Block:429 (7.0L )/460 (7.5L)
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44
A$5,543.43