Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock Throttle Body Victor EFI 4-Barrel 4150 Style Flange 1.75In Bores Die Cast
Edelbrock Throttle Body Victor EFI 4-Barrel 4150 Style Flange 1.75In Bores Die Cast
A$1,007.99
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The Edelbrock #4150 Victor EFI 4-Barrel Throttle Body is the perfect complement for fuel injection systems that are based on the Victor EFI line of intake manifolds. This high-quality satin-finished component is an affordably priced replacement for throttle body #3878. The Victor #4150 Throttle Body has four 1.75-inch throttle bores for a 1,000 CFM flow rating and its 4150-style base flange will fit most of the Edelbrock Victor and Pro-Flo 4 style manifolds or other similar manifolds with a 4150-style square-bore carburetor flange and standard bolt spacing. The Victor EFI Four-Barrel Throttle Body will accept a standard air cleaner with a 5-1/8-inch flange and the assembly includes a Delphi/GM 4-pin stepper-style idle air control (IAC) motor with a GM-style 3-pin throttle position sensor (TPS) and 1-bar GM MAP sensor. Included are multiple vacuum take-offs (3/8 and 1/4 at the front with 3/8, 1/4 and 3/16 at the rear, and another 3/16 on the passenger side), and a MAP sensor mounting location incorporated on the housing. Precision throttle control is provided by a progressive linkage with provisions for a 700R4-style throttle valve cable. Measurement from base flange to air cleaner flange is 2.53 inches. This Edelbrock-designed throttle body is diecast and fully machined by the supplier prior to assembly with high-quality components at the Edelbrock factory.
Product Overview
With smooth; larger-than-stock bores; our throttle bodies are designed to deliver more air for increased performance. The Edelbrock #4150 Victor EFI 4-Barrel Throttle Body is the perfect complement for fuel injection systems that are based on our Victor EFI line of intake manifolds. This high-quality satin-finished unit is an affordably priced replacement for our #3878 throttle body. The Victor #4150 Throttle Body has four 1.75-inch throttle bores for a 1;000 CFM flow rating and its 4150-style base flange fits most of our Edelbrock Victor and Pro-Flo 4 style manifolds or other similar manifolds with a standard 4150-style square-bore carburetor flange and standard bolt spacing. The Victor EFI Four-Barrel Throttle Body will accept a standard air cleaner with a 5-1/8-inch flange and the assembly includes a Delphi/GM 4-pin stepper-style idle air control (IAC) motor with a GM-style 3-pin throttle position sensor (TPS) and a 1-bar GM MAP sensor. Included are multiple vacuum take-offs (3/8 and 1/4 at the front with 3/8; 1/4 and 3/16 at the rear; and another 3/16 on the passenger side); and a MAP sensor mounting location incorporated on the housing. Precision throttle control is provided by a progressive linkage with provisions for a 700R4-style throttle valve cable. Measurement from base flange to air cleaner flange is 2.53 inches. This Edelbrock-designed throttle body is diecast and fully machined by the supplier prior to assembly with high-quality components at the Edelbrock factory.
Features and Benefits
- Affordably Priced Replacement For Throttle Body No. 3878
Product Details
| Airflow Rate: | 1000 |
|---|---|
| Bore Diameter: | 1.75 |
| Cubic Feet Per Minute Rating: | 1000 |
| Description: | Throttle Body |
| Finish: | Satin |
| Fuel Injectors Included: | No |
| Fuel System Grade: | All |
| Fuel System Type: | Gas |
| Gasket Or Seal Included: | Yes |
| Idle Air Control Motor Included: | Yes |
| Material: | Die-Cast Aluminum |
| Mounting Hardware Included: | Yes |
| Part Number: | ede4150 |
| Quantity: | Sold Individually |
| RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Series: | Universal 4150 Style 4-Barrel |
| Throttle Body Finish: | Satin |
| Throttle Body Material: | Die-Cast Aluminum |
| Throttle Body Spacer Color: | N/A |
| Throttle Body Spacer Finish: | N/A |
| Throttle Body Spacer Included: | No |
| Throttle Body Spacer Material: | N/A |
| Throttle Body Spacer Thickness: | N/A |
| Throttle Body Type: | Electronic Fuel Injection |
| Throttle Position Sensor Included: | Yes |
| Type: | 4 Barrel |
| Venturi Quantity: | 4 |
| WARNING CA Proposition 65 Message: | WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| WARNING CA Proposition 65: | Yes |
Part Type
Fuel Injection Throttle Body
Features
- Affordably Priced Replacement For Throttle Body No. 3878
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 4150
- Product Attributes - Part Type
- Throttle Bodies
- Product Attributes - Product Line
- Edelbrock Victor EFI 4-Barrel Throttle Bodies
- Product Attributes - UPC
- 085347041503
- Product Attributes - Throttle Body Style
- Multi-port injection, MPI
- Product Attributes - Throttle Body Actuation
- Cable
- Product Attributes - Venturi Quantity
- 4
- Product Attributes - Airflow Rate (cfm)
- 1,000 cfm
- Product Attributes - TPS Sensor Included
- Yes
- Product Attributes - IAC Motor Included
- Yes
- Product Attributes - Gaskets Included
- Yes
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Injectors Included
- No
- Product Attributes - Throttle Body Material
- Cast aluminum
- Product Attributes - Throttle Body Color
- Natural
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- Designed with 1.75 in. throttle bores and fits square bore carburetor flange intake manifolds only.
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede4150 |
| SFX Item ID | 4237596 |
| Supplier Item Code | 4237596 |
| Manufacturer SKU | 4150 |
| Manufacturer UPC | 85347041503 |
| Alternative References | edl-4150, 1-1/4in., 221?351w;, v8;, EDB4150, 4-Barrel |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44
A$5,543.43