Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock SBC Performer EPS Manifold - Chrome Plasma Coated
Edelbrock SBC Performer EPS Manifold - Chrome Plasma Coated
A$1,110.79
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
IMPORTANT NOTICE: Please see the charts and guides tab for a comparison of square bore vs spread bore. Intake will not fit under stock Corvette hood.
Edelbrock part #2701-CP Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. The Edelbrock Performer EPS intake manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. This PN 2701-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain. Will not fit under stock Corvette hood!
Product Overview
Edelbrock part #2701-CP Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. The Edelbrock Performer EPS intake manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. This PN 2701-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain.
Features and Benefits
- 7 stage prewash and 4 stage coating for a beautiful and durable finish
- Low profile with provisions for stock accessory brackets
- No polishing, just wipe and go!
- Outstanding performance for street rods, muscle cars and classics
Product Details
| Basic Operating RPM Range: | Idle-5500 |
|---|---|
| CNC Ported: | No |
| Center Maximum Height: | 4.270 |
| Description: | Edelbrock SBC Performer EPS Manifold - Chrome Plasma Coated |
| EGR Port: | No |
| Finish: | Chrome Plasma |
| Flange Type: | 4150 |
| Front Maximum Height: | 3.740 |
| Gasket Or Seal Included: | No |
| Grade Type: | Performance |
| Material: | Aluminum |
| Part Number: | ede2701-CP |
| RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Rear Maximum Height: | 4.800 |
| Series: | Performer |
| Single Or Dual Plane Type: | Dual |
| Vehicle Model: | Chevrolet |
Application Summary
Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Part Type
Engine Intake Manifold
Features
- 7 stage prewash and 4 stage coating for a beautiful and durable finish
- Low profile with provisions for stock accessory brackets
- No polishing, just wipe and go!
- Outstanding performance for street rods, muscle cars and classics
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 2701-CP
- Product Attributes - Part Type
- Intake Manifolds, Carbureted
- Product Attributes - Product Line
- Edelbrock Performer EPS Intake Manifolds
- Product Attributes - UPC
- 085347270101
- Product Attributes - Intake Section Included
- Complete
- Product Attributes - Engine Block Deck Height
- Standard deck
- Product Attributes - Carburetor Quantity
- One
- Product Attributes - Intake Style
- Dual plane
- Product Attributes - Basic Operating RPM Range
- Idle-5,500
- Product Attributes - Intake Manifold Height
- 4.270 in.
- Product Attributes - Intake Color
- Chrome plasma coated
- Product Attributes - Intake Material
- Aluminum
- Product Attributes - EGR
- No
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- Please see the charts and guides tab for a comparison of square bore vs spread bore. Intake will not fit under stock Corvette hood.
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede2701-CP |
| SFX Item ID | 4237668 |
| Supplier Item Code | 4237668 |
| Manufacturer SKU | 2701-CP |
| Manufacturer UPC | 85347270101 |
| Alternative References | EDB2701-CP, EDL-2701-CP |
Compatibility
Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44
A$5,543.43