Edelbrock SBF Hydraulic Roller Cam

SKU: EDE2221

Camshafts

EDE Rollin Thunder Camshaft

Edelbrock

Edelbrock SBF Hydraulic Roller Cam

SKU: EDE2221

Camshafts

EDE Rollin Thunder Camshaft

Sale ends in Calculating... Wed 14 Oct, 2:30 am AEST

Available from MFR. This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.

We accept

Description

Edelbrock Rollin' Thunder Camshaft #2221 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 384HP and 347 Ft Lbs of Torque when paired with a Pro-Flo 2 system #35210 and Performer RPM cylinder heads #60225. Must use a high stall torque converter and stock ratio rocker arms only.Camshaft specifications:- Intake duration: 227 Degrees- Exhaust duration: 234 Degrees- Intake lift: .520"- Exhaust lift: .520"- Lobe separation: 112 Degree- Intake Center Line: 107 Degree- Vacuum: 12"

Product Overview

Edelbrock Rollin' Thunder Camshaft #2221 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 384HP and 347 Ft Lbs of Torque when paired with a Pro-Flo 2 system #35210 and Performer RPM cylinder heads #60225. Must use a high stall torque converter and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 227 Degrees - Exhaust duration: 234 Degrees - Intake lift: .520" - Exhaust lift: .520" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 12"

Features and Benefits

Use Only Stock Ratio Rocker Arms

Product Details

Advertised Exhaust Duration:	302
Advertised Intake Duration:	298
Cam Type:	Roller
Computer Controlled Compatible:	No
Description:	Rollin Thunder Camshaft
Engine Make/Size:	Ford 289-302
Exh. Duration @ .050 in. (Deg):	234
Exh. Duration Advertised (Deg):	302
Exhaust Duration at .050 inch Lift:	234
Exhaust Valve Lift (in.):	0.52
Exhaust Valve Lift with Factory Rocker Arm Ratio:	0.582
Exhaust Valve Lift:	0.364
Int. Duration @ .050 in. (Deg):	227
Int. Duration Advertised (Deg):	298
Intake Duration @ 0.050 in.:	227 Degree
Intake Duration Advertised:	298
Intake Duration at .050 Inch Lift:	227
Intake Valve Lift (in.):	0.520
Intake Valve Lift with Factory Rocker Arm Ratio:	0.573
Intake Valve Lift:	0.358
Lifter Type:	Roller
Lobe Separation:	112
Part Number:	ede2221
RGL:	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
RPM Range:	1500-6500
Usage:	OEM
WARNING CA Proposition 65 Message:	WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
WARNING CA Proposition 65:	Yes

Application Summary

Ford:Small-Block Windsor:289 (4.7L)/302 (5.0L)

Part Type

Engine Camshaft

Data: v4.2 - Upd: 2026-09-28 22:20:31

Features

Use Only Stock Ratio Rocker Arms

Specifications

Product Attributes - Brand: Edelbrock
Product Attributes - Manufacturer's Part Number: 2221
Product Attributes - Part Type: Camshafts
Product Attributes - Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Camshafts
Product Attributes - UPC: 085347022212
Product Attributes - Cam Style: Hydraulic roller, Retro-fit
Product Attributes - Camshaft Use: Street/Strip
Product Attributes - Basic Operating RPM Range: 1,500-6,500
Product Attributes - Intake Duration at 050 inch Lift: 227
Product Attributes - Exhaust Duration at 050 inch Lift: 234
Product Attributes - Duration at 050 inch Lift: 227 int./234 exh.
Product Attributes - Advertised Intake Duration: 298
Product Attributes - Advertised Exhaust Duration: 302
Product Attributes - Advertised Duration: 298 int./302 exh.
Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio: 0.520 in.
Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.520 in.
Product Attributes - Valve Lift with Factory Rocker Arm Ratio: 0.520 int./0.520 exh.
Product Attributes - Lobe Separation (degrees): 112
Product Attributes - Remanufactured: No
Product Attributes - Computer-Controlled Compatible: No
Product Attributes - Valve Springs Required: Yes
Product Attributes - Quantity: Sold individually.
Product Attributes - Notes: This cam is a cast cam and requires a cast or melonized steel distributor drive gear.

Reference Information

Brand Name/s	Edelbrock
StreetFX SKU	ede2221
SFX Item ID	4236907
Supplier Item Code	4236907
Manufacturer SKU	2221
Manufacturer UPC	85347022212
Alternative References	64-street, 64cc;, v8;, EDB2221, EDL-2221