Edelbrock SBC LT1 Roller Cam

SKU: EDE2108

Camshafts

EDE Rollin Thunder Camshaft...

Edelbrock

Edelbrock SBC LT1 Roller Cam

SKU: EDE2108

Camshafts

EDE Rollin Thunder Camshaft...

Sale ends in Calculating... Thu 15 Oct, 2:21 am AEST

Limited Availability from MFR Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.

We accept

Description

Edelbrock Rollin' Thunder Camshaft #2108 is designed for the LT1 engines from 1992-97 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This camshaft produced 430 HP and 420 Ft Lbs of Torque when paired with RPM Air Gap intake manifold #7109 and RPM LT4 cylinder heads #61939. Reflashing of the ECU is required and can be used with either standard or automatic transmissions. Use with high stall torque converter only. Camshaft specifications:- Intake duration: 218 Degrees- Exhaust duration: 218 Degrees- Intake lift: .525"- Exhaust lift: .525"- Lobe separation: 112 Degree- Intake Center Line: 112 Degree- Vacuum: 15"

Product Overview

Edelbrock Rollin' Thunder Camshaft #2108 is designed for the LT1 engines from 1992-97 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This camshaft produced 430 HP and 420 Ft Lbs of Torque when paired with RPM Air Gap intake manifold #7109 and RPM LT4 cylinder heads #61939. Reflashing of the ECU is required and can be used with either standard or automatic transmissions. Use with high stall torque converter only. Camshaft specifications: - Intake duration: 218 Degrees - Exhaust duration: 218 Degrees - Intake lift: .525" - Exhaust lift: .525" - Lobe separation: 112 Degree - Intake Center Line: 112 Degree - Vacuum: 15"

Features and Benefits

Use with High Stall Torque Converter Only

Product Details

Advertised Exhaust Duration:	286
Advertised Intake Duration:	286
Cam Type:	Roller
Computer Controlled Compatible:	Yes
Description:	Rollin Thunder Camshaft
Engine Make/Size:	Chevy LT1
Exh. Duration @ .050 in. (Deg):	218
Exh. Duration Advertised (Deg):	286
Exhaust Duration at .050 inch Lift:	218
Exhaust Valve Lift (in.):	0.525
Exhaust Valve Lift with Factory Rocker Arm Ratio:	0.525
Exhaust Valve Lift:	0.525 in.
Int. Duration @ .050 in. (Deg):	218
Int. Duration Advertised (Deg):	286
Intake Duration @ 0.050 in.:	218 Degree
Intake Duration Advertised:	286
Intake Duration at .050 Inch Lift:	218
Intake Valve Lift (in.):	0.525
Intake Valve Lift with Factory Rocker Arm Ratio:	0.525
Intake Valve Lift:	0.525 in.
Lifter Type:	Roller
Lobe Separation:	112
Part Number:	ede2108
RGL:	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
RPM Range:	1500-6500
Usage:	OEM
WARNING CA Proposition 65 Message:	WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
WARNING CA Proposition 65:	Yes

Application Summary

Chevrolet:Small-Block Gen V LT1:350 (5.7L)

Part Type

Engine Camshaft

Data: v4.2 - Upd: 2026-10-14 04:40:25

Features

Use with High Stall Torque Converter Only

Specifications

Product Attributes - Brand: Edelbrock
Product Attributes - Manufacturer's Part Number: 2108
Product Attributes - Part Type: Camshafts
Product Attributes - Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Camshafts
Product Attributes - UPC: 085347021086
Product Attributes - Cam Style: Hydraulic roller, OE roller
Product Attributes - Camshaft Use: Street
Product Attributes - Basic Operating RPM Range: 1,500-5,500
Product Attributes - Intake Duration at 050 inch Lift: 218
Product Attributes - Exhaust Duration at 050 inch Lift: 218
Product Attributes - Duration at 050 inch Lift: 218 int./218 exh.
Product Attributes - Advertised Intake Duration: 286
Product Attributes - Advertised Exhaust Duration: 286
Product Attributes - Advertised Duration: 286 int./286 exh.
Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio: 0.525 in.
Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.525 in.
Product Attributes - Valve Lift with Factory Rocker Arm Ratio: 0.525 int./0.525 exh.
Product Attributes - Lobe Separation (degrees): 112
Product Attributes - Remanufactured: No
Product Attributes - Computer-Controlled Compatible: Yes
Product Attributes - Valve Springs Required: Yes
Product Attributes - Quantity: Sold individually.

Reference Information

Brand Name/s	Edelbrock
StreetFX SKU	ede2108
SFX Item ID	4236908
Supplier Item Code	4236908
Manufacturer SKU	2108
Manufacturer UPC	85347021086
Alternative References	EDB2108, EDL-2108, LT1