COMP Cams HRT Blower Stage 1 Hydraulic Roller Camshaft 03-08 Dodge 5.7/6.1L Hemi
COMP Cams HRT Blower Stage 1 Hydraulic Roller Camshaft 03-08 Dodge 5.7/6.1L Hemi
A$1,288.55
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Product Overview
The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines. The “Low Shock Technology” features lobe profiles designed to maximize horsepower while improving stability at higher RPM. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT Camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250% improvement in the effective load bearing area, allowing for much higher loads.
Organized into stages, these new options range from mild street up to heavily modified race-oriented builds. All HRT Turbo & Supercharger Camshafts require a COMP Cams DOD Delete Kit and upgraded valve springs. Depending on application, 5.7L-6.4L w/ VVT 2009+ engines also require either a COMP Cams phaser limiter or lock kit.
Product Details
| Advertised Exhaust Duration: | 291 |
|---|---|
| Advertised Intake Duration: | 279 |
| Assembly Lubricant Included: | No |
| Basic Operating RPM Range: | 1,800-6,600 |
| C.A.R.B. E.O. Number: | N/A |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles?: | No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: | Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exemption Reason: | N/A |
| California Proposition 65: | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Cam Type: | Hydraulic Roller |
| Camshaft Gear Attachment: | 1-Bolt |
| Camshaft Material: | Billet Steel |
| Camshaft Series: | HRT Blower |
| Description: | HRT Blower Stage 1 Hydraulic Roller Camshaft for '03-'08 Dodge 5.7/6.1L HEMI |
| Engine Family: | Dodge 5.7/6.1L Non-VVT HEMI |
| Estimated Horsepower Gain: | N/A |
| Exhaust Duration at .050 inch Lift: | 233 |
| Exhaust Valve Lift: | 0.594 |
| Gaskets Included: | No |
| Grind Number: | Stage 1 Supercharger |
| Intake Duration at .050 Inch Lift: | 221 |
| Intake Valve Lift: | 0.594 |
| Lifter Style: | Hydraulic Roller |
| Lifters Included: | No |
| Lobe Separation: | 116 |
| Locks Included: | No |
| Part Number: | cca112-335-11 |
| Pushrods Included: | No |
| Recommended Upgraded Stock Rocker Arms: | N/A |
| Recommended Valve Springs: | 26918 |
| Retainers Included: | No |
| Stage: | 1 |
| Timing Set Included: | No |
| Title: | HRT Blower Stage 1 Hydraulic Roller Camshaft for '03-'08 Dodge 5.7/6.1L HEMI |
| Usage: | Street/Strip |
| Valve Seals Included: | No |
| Valve Spring Seats Included: | No |
| Valve Springs Included: | No |
Application Summary
Dodge 5.7/6.1L HEMI Engines w/o VVT
Part Type
Engine Camshaft
Specifications
- Product Attributes - Brand
- COMP Cams
- Product Attributes - Manufacturer's Part Number
- 112-335-11
- Product Attributes - Part Type
- Camshafts
- Product Attributes - Product Line
- COMP Cams Turbo and Blower HRT Camshafts
- Product Attributes - UPC
- 036584408871
- Product Attributes - Cam Style
- Hydraulic roller, OE roller
- Product Attributes - Camshaft Use
- Street/Strip
- Product Attributes - Basic Operating RPM Range
- 1,800-6,600
- Product Attributes - Intake Duration at 050 inch Lift
- 221
- Product Attributes - Exhaust Duration at 050 inch Lift
- 233
- Product Attributes - Duration at 050 inch Lift
- 221 int./233 exh.
- Product Attributes - Advertised Intake Duration
- 279
- Product Attributes - Advertised Exhaust Duration
- 291
- Product Attributes - Advertised Duration
- 279 int./291 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.594 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.594 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.594 int./0.594 exh.
- Product Attributes - Lobe Separation (degrees)
- 116
- Product Attributes - Remanufactured
- No
- Product Attributes - Computer-Controlled Compatible
- Yes
- Product Attributes - Grind Number
- HRT-S1B
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- Requires a DOD delete kit.
Reference Information
| Brand Name/s | Comp Cams |
|---|---|
| StreetFX SKU | cca112-335-11 |
| SFX Item ID | 4118104 |
| Supplier Item Code | 4118104 |
| Manufacturer SKU | 112-335-11 |
| Manufacturer UPC | 36584408871 |
| Alternative References | 53022065ab;, CPC112-335-11, 5.7/6.1L |
Brochures
Compatibility
Dodge 5.7/6.1L HEMI Engines w/o VVT
Loading compatibility information...
Keep shopping
More from Comp Cams
