COMP Cams Pushrod Hi-Tech 5/16 7.425in
COMP Cams Pushrod Hi-Tech 5/16 7.425in
A$42.13
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run. Today's all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Techâ„¢ pushrods fill that requirement. Hi-Techâ„¢ pushrods feature a one-piece design from .080" wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification.
Product Overview
Prior to extensive research at COMP Cams, it was thought that the pushrod only had to be strong enough not to fail, bend or burn up at the ends. But our engineers have learned that the frequency of the pushrod must match that of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run. Today’s all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech Pushrods fill that requirement.
The one-piece design from .080" wall seamless chromemoly tubing ensures the ultimate in strength and durability. The ends are precision formed, yielding added thickness in the critical tip area for strength while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated to ensure compatibility with guide plates and for maximum strength. They are OD-ground for consistency and black oxide finished with a length and part number laser etched on the OD for ease of identification. Hi-Tech Pushrods listed by length can be found on pages 262-263 while other wall thicknesses are available on pages 264-265. Hi-Tech Pushrods can be ordered as single units or in sets of 16.
* One-piece construction from .080" wall seamless chromemoly
* Heat-treated for extended durability & guide plate compatibility
* Precision formed and reinforced 5/16" ball type ends
* Black oxide finished and laser etched part number & length
* Ideal for serious street performance and race applications
Product Details
| Amazon ASIN: | B001G9AXB0 |
|---|---|
| C.A.R.B. E.O. Number: | N/A |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles?: | Yes |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: | Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exemption Reason: | No impact on pollution output of vehicle. |
| California Proposition 65: | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Description: | Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod |
| Diameter (in.): | 0.3125 |
| Diameter: | 5/16 |
| Guide Plate Compatible: | Yes |
| Length: | 7.425 |
| Lifter End Style: | 5/16 Oil Through One-Piece Construction Ball |
| Overall Length (in.): | 7.425 |
| Part Number: | cca7796-1 |
| Pushrod Series: | Hi-Tech |
| Rocker End Style: | 5/16 Oil Through One-Piece Construction Ball |
| Title: | Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod |
| Wall Thickness: | 0.08 |
Part Type
Engine Push Rod
Specifications
- Product Attributes - Brand
- COMP Cams
- Product Attributes - Manufacturer's Part Number
- 7796-1
- Product Attributes - Part Type
- Pushrods, Valvetrain
- Product Attributes - Product Line
- COMP Cams Hi-Tech Pushrods
- Product Attributes - UPC
- 036584094944
- Product Attributes - Assembled
- Yes
- Product Attributes - Compatible with Guideplates
- Yes
- Product Attributes - Pushrod Tube Diameter
- 5/16 in.
- Product Attributes - Pushrod Material
- Chromoly
- Product Attributes - Top Tip Style
- Ball
- Product Attributes - Bottom Tip Style
- Ball
- Product Attributes - Intake Overall Length (in.)
- 7.425 in.
- Product Attributes - Exhaust Overall Length (in.)
- 7.425 in.
- Product Attributes - One-Piece Pushrod
- Yes
- Product Attributes - Oiling
- Yes
- Product Attributes - Tapered
- No
- Product Attributes - Tip Attachment
- Formed
- Product Attributes - Top Tip Diameter
- 5/16 in.
- Product Attributes - Bottom Tip Diameter
- 5/16 in.
- Product Attributes - Wall Thickness (in.)
- 0.080 in.
- Product Attributes - Heat-Treated
- Yes
- Product Attributes - Quantity
- Sold individually.
Reference Information
| Brand Name/s | Comp Cams |
|---|---|
| StreetFX SKU | cca7796-1 |
| SFX Item ID | 4121574 |
| Supplier Item Code | 4121574 |
| Manufacturer SKU | 7796-1 |
| Manufacturer UPC | 36584094944 |
| Alternative References | 7.425in |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Comp Cams
