Description

With a .625" maximum lift, these Beehive Valve Springs were designed for hydraulic Roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive Camshaft profiles. Part # OD ID Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 26918 1.0751.310 .650.885 125 @ 1.800 367 @ 1.150 1.140 372 762, 772, 788 761, 774, 783, 787, 795 4705 4753

Product Overview

COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles. *Performance Street* COMP Cams Performance Street Valve Springs provide extra stability and endurance. These are the most popular COMP springs for street applications and are used primarily by customers with performance hydraulic flat tappet & hydraulic rollers in mind. COMP technicians will match the proper spring for each customer’s given lift and install height requirements. *Race/Street* Race/Street Valve Springs provide extra stability and endurance for most race/street applications. These springs are used by the street customer who has chosen a larger lift cam with race being the primary focus, along with limited street use. COMP technicians will match the proper spring for the customer exploring more race than street driving for larger hydraulic, hydraulic rollers and some solid flat tappet profiles, given lift and install height requirements.

Product Details

Amazon ASIN:	B000CIUBIQ
C.A.R.B. E.O. Number:	N/A
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?:	Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?:	Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?:	Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles?:	Yes
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?:	Yes, but must be a race/competition only vehicle.
C.A.R.B. Exemption Reason:	No impact on pollution output of vehicle.
California Proposition 65:	WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov
Camshaft Type:	OEM
Coil Bind Height(in):	OEM
Coil Bind Height:	1.140
Compatible .570" Guide Diameter Spring Seats:	4705-16
Compatible Retainer:	795-16
Compatible Shims:	4753
Compatible Spring Cup (O.D. Locator):	4709-16
Damper:	No
Description:	Performance Street 1.310" OD Beehive Spring; 1.800" Installed Height; 16 Springs
Inside Diameter(in):	0.660/0.885
Installed Height(in):	1.8
Installed Pressure(lbs):	125
Number of Springs:	1
Open Height(in):	1.15
Open Pressure(lbs):	367
Outer Bottom Spring Inside Diameter:	0.885
Outer Bottom Spring Outside Diameter:	1.31
Outer Top Spring Inside Diameter:	0.65
Outer Top Spring Outside Diameter:	1.075
Outside Diameter(in):	1.055/1.29
Part Number:	cca26918-16
Position:	N/A
Seat Height:	1.8
Seat Pressure:	125
Spring Rate(lbs/in):	313
Spring Rate:	372
Spring Type:	Single
Title:	Performance Street 1.310" OD Beehive Spring; 1.800" Installed Height; 16 Springs
Valve Spring Series:	Performance Street

Kit Options

This item is available as a full kit.
Select a kit option in the following table if you are looking for this item in a bundle form with all associated components.

Kit option/s:

Thumb	SKU	Kit Title
	ccaMK112-300-11	Comp Cams Master Cam Kit Dodge 5.7/6.1L HRT Stage 1 NSR (1x cca112-300-11, 1x cca8720-16, 1x cca607-16, 1x cca856Y-16, 1x cca4685-16, 1x cca26918-16, 1x cca516-16, 1x cca761-16)

Data: v4.2 - Upd: 2026-10-01 02:12:10

Specifications

Product Attributes - Brand

COMP Cams

Product Attributes - Manufacturer's Part Number

26918-16

Product Attributes - Part Type

Valve Springs

Product Attributes - Product Line

COMP Cams Valve Springs

Product Attributes - UPC

036584077473

Product Attributes - Valve Spring Style

Beehive

Product Attributes - Number of Springs Per Valve

Single

Product Attributes - Maximum Valve Lift (in.)

0.625 in.

Product Attributes - Retainers Included

No

Product Attributes - Outside Diameter of Outer Spring (in.)

1.075 in./1.310 in.

Product Attributes - Coil Bind Height (in.)

1.140 in.

Product Attributes - Damper Spring Included

No

Product Attributes - Spring Rate (lbs./in.)

372 lbs./in.

Product Attributes - Inside Diameter of Outer Spring (in.)

0.650 in./0.885 in.

Product Attributes - Locks Included

No

Product Attributes - Valve Stem Seals Included

No

Product Attributes - Valve Springs Coated

No

Product Attributes - Remanufactured

No

Product Attributes - Quantity

Sold as a set of 16.

Product Attributes - Notes

O.D. at the top of the spring is 1.075 in. and 1.310 in. at the bottom. I.D. at the top of the spring is 0.650 in. and 0.885 in. at the bottom.

Compatibility