Afe
aFe POWER Momentum GT Pro Dry S Cold Air Intake 12-17 Jeep Grand Cherokee SRT-8/SRT V8-6.4L HEMI
afe51-76206-1
A$815.07
A$929.91
aFe MACH Force-Xp 304 Stainless Steel Cat-Back Exhaust Polished 2020 Chevrolet Corvette C8
aFe MACH Force-Xp 304 Stainless Steel Cat-Back Exhaust Polished 2020 Chevrolet Corvette C8
A$6,162.85
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN to 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2 IN diameter polished stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This cat-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.
Product Overview
This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN to 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2 IN diameter polished stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This cat-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.
Features and Benefits
- Up to +7 HP and +5 lbs. x Ft. TQ.
- Constructed from 3 IN to 2-1/2 IN Mandrel-Bent Brushed Finished 304 Stainless Steel Tubing
- Quad 4-1/2 IN Diameter Polished Stainless Steel Clamp-On Exhaust Tips
- Accommodates Factory AFM and NPP Exhaust Valves (Valve Motors Not Included)
- Removes Muffler to Provide an Aggressive Tone
- Utilizes Factory Style Flanges and Hangers for a Secure Fit
- 100% TIG-Welded for Strength and Durability
- All Necessary Hardware is Included for a Hassle-Free Installation
Product Details
| Description: | MACH Force-Xp Cat-Back Exhaust w/ NPP Exhaust Valve Polished Tip No Muffler |
|---|---|
| Exhaust Type: | Cat-Back |
| Exit Location: | Rear |
| Horse Power Increase: | 7 |
| Muffler Included: | No |
| Part Number: | afe49-34124NM-P |
| Sound Level: | Aggressive |
| System Finish: | Natural |
| System Material: | 304 Stainless Steel |
| Tip Cut: | Slant |
| Tip Finish: | Polished |
| Tip Material: | 304 stainless steel |
| Tip Outlet Size: | 3.5 |
| Tip Quantity: | Four |
| Torque Increase: | 5 |
| Tubing Diameter: | 3 to 2-1/2 |
| WARNING CA Proposition 65 Message: | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| WARNING CA Proposition 65: | Yes |
Application Summary
Chevrolet Corvette (C8) 20-24 V8-6.2L
Part Type
Exhaust System Kit
Features
- 100% TIG-Welded for Strength and Durability
- Accommodates Factory AFM and NPP Exhaust Valves (Valve Motors Not Included)
- All Necessary Hardware is Included for a Hassle-Free Installation
- Constructed from 3 IN to 2-1/2 IN Mandrel-Bent Brushed Finished 304 Stainless Steel Tubing
- Quad 4-1/2 IN Diameter Polished Stainless Steel Clamp-On Exhaust Tips
- Removes Muffler to Provide an Aggressive Tone
- Up to +7 HP and +5 lbs. x Ft. TQ.
- Utilizes Factory Style Flanges and Hangers for a Secure Fit
Specifications
- Product Attributes - UPC
- 802959633304
- Product Attributes - Brand
- AFE Power
- Product Attributes - Tip Cut
- Slant
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Tip Shape
- Round
- Product Attributes - Tip Finish
- Polished
- Product Attributes - Exhaust Type
- Dual in/Four out
- Product Attributes - Product Line
- aFe Mach Force XP Exhaust Systems
- Product Attributes - System Style
- Cat-back
- Product Attributes - Tip Included
- Yes
- Product Attributes - Tip Material
- 304 stainless steel
- Product Attributes - Tip Quantity
- 4
- Product Attributes - Exit Location
- Split rear
- Product Attributes - System Finish
- Brushed
- Product Attributes - Inlet Quantity
- 2
- Product Attributes - Tip Edge Style
- Rolled edge
- Product Attributes - System Material
- 304 stainless steel
- Product Attributes - Muffler Included
- No
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
- Product Attributes - Tip Outlet Size (in.)
- 4.50
- Product Attributes - Tailpipe Diameter (in.)
- 2.50 in.
- Product Attributes - Manufacturer's Part Number
- 49-34124NM-P
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 3.00 in.
Reference Information
| Brand Name/s | Afe |
|---|---|
| StreetFX SKU | afe49-34124NM-P |
| SFX Item ID | 4372757 |
| Supplier Item Code | 4372757 |
| Manufacturer SKU | 49-34124NM-P |
| Manufacturer UPC | 802959633304 |
Brochures
Compatibility
Chevrolet Corvette (C8) 20-24 V8-6.2L
Loading compatibility information...
Keep shopping
More from Afe
Afe
aFe Takeda Momentum Pro 5R Cold Air Intake System 2018 Honda Accord I4 1.5L (t)
afe56-70002R
A$800.20
Afe
aFe 18-22 Kia Stinger V6-3.3L (tt) MagnumFORCE Intakes Stage-2 Pro DRY S
afe56-70038D
A$976.14
A$1,115.27
Afe
aFe 2019-2020 Hyundai Veloster N L4-2.0L (T) Takeda Turbo Inlet w/ Takeda Intake
afe59-20002
A$332.04
Afe
aFe 18-22 Kia Stinger V6-3.3L (tt) MagnumFORCE Intakes Stage-2 Pro 5R
afe56-70038R
A$926.46
A$1,059.76
